2.3.11
Performing Additional Measurements
To perform additional tests using the same method
Press [TEST] key.
The display shows:
Confirm with [TEST] key.
Or press [ZERO] key to perform a new zero calibration.
The display shows:
2.3.12
Selecting a New Method
Press [ESC] key to return to method selection.
Or enter the required method number directly
e.g. [Shift] + [1] [6] [0] for CyA-TEST (Cyanuric acid).
Confirm with [ ] key.
Zero accepted
prepare Test
press TEST
prepare Zero
press ZERO
Summary of Contents for WSL25 Pro
