Aquamatic Aquacell P2 Series, User Manual

Page: 50 / 78

OP
ERA
TION
4.14
REM I/P OFF EVENT The external Remote Control input has opened
PRG COMPLET EVENT Program has completed
STOPPED EVENT STOP button has been pressed during a program
WARN LATCH WARNING A Sampler Warning has occurred and Special Option LATCH
WARNING OP is set for AUTO OFF or MANUAL
WARN T/OUT WARNING A latched Sampler Warning has automatically timed out
WARN DISAB WARNING A latched Sampler Warning has been manually disabled
TIMED OUT WARNING Sampler has failed to intake a sufficient volume of liquid into its Sample
Chamber within the allotted time (default 64 seconds)
See MAINTENANCE Section for details of how to react to this issue
CLEAN CHTOP WARNING There is a con ductive path between the ‘common’ central Level
Sensing Probe and either one or both of the other two Level Sensing
Probes prior to commencing the sample intake phase
See MAINTENANCE Section for details of how to react to this issue
GUARD HIT WARNING The short Level Sensing Guard Probe has been contacted by incoming
wastewater before the opposite Normal Probe
See MAINTENANCE Section for details of how to react to this issue
OPEN CCT WARNING One or more of the 3 Level Sensing Probes are not connecting to its
contact springs at commencement of the sample cycle
See MAINTENANCE Section for details of how to react to this issue
BOT FAULT WARNING Electrical signals from Bottler are incorrect
See MAINTENANCE Section for details of how to react to this issue
T/SENS FLT WARNING The Sample Temperature Probe has failed or is not connected
B BCK-UP ON WARNING Appears where main power is lost with a Sampler being operated on
mains with a float charged Back-Up battery option
PWR RESTORD WARNING Appears where main power is restored with a Sampler being operated
on mains with a float charged Back-Up battery option
LOW VOLTS WARNING Battery has become fully discharged, or Mains Power supply has
dropped below acceptable limits
See MAINTENANCE Section for details of how to react to this issue
TRACT BLKD WARNING Some part of the Sample Tract is blocked causing an over pressure in
the Sample Chamber (where Blockage Detection System option is fitted)
MAINTENANCE Section for details of how to react to this issue