Aquamatic Aquacell P2 Series, User Manual

Page: 23 / 78

INT
RODU
CT
ION
2.9
Sample temperature data can be outputted to a suitable computer or hand held device
via the optional Data Connection, details of how to set this up can be found in Section
‘Operation > Basic Operations’
Aux 1 (multi-function connection)
This connector is commonly supplied as the Separate 12VDC Lead Acid Battery
Connection. As such it will be supplied with a 1.5m cable incorporating red and black
crocodile clips for connection to a suitable third party battery. Additional functionality via
this connector is available such as connection to a Pressurised Pipeline Interface.
Mains
When required Aquacell P2 Samplers can be powered from a mains power supply.
When specified this connection will be supplied with a 1.5m mains cable
Ancillary Signals
Required when connecting Sampler to peripheral equipment. When connected to
appropriate flow monitoring equipment, this connection enables the Sampler to extract
sample on a flow proportional basis. Accepts flow input (4-20mA or volt-free contact
closure) and Remote Control input. Additionally this connection can provide Sample
Acquired and Sampler Warning outputs
Bottler
Often there is a need to separate collected samples into individual containers. For this
purpose the Aquacell P2-MULTIFORM model can be supplied with various multi
container Bottlers. All Aquamatic Bottlers comprise a Distributor Unit characterised by
its transparent Distributor Dome, a Distributor Pipe and a Bottle Carrier
Diagram shows 12x1 PET Bottler
connected to P2-Sampler Module