Aquamatic Aquacell P2 Series, User Manual

Page: 45 / 78

OP
ERA
TION
4.9
SYSBOT6 BOT 15 SEC PAUS

NO
[YES]
To avoid residual effluent drops falling into a subsequent
Bottle the Sampler can be programmed to hold the
Distributor Pipe over each Bottle for 15 seconds following
Sample Release
➔ See SYSBOT7
SYSBOT7 INCREMENT BY

TIME
[SAMPLES]
The Bottler can be programmed to advance bottles (or
groups) either at regular time intervals or after a fixed
number of samples
➔
See SYSBOT8 if TIME and SAMPLING MODE is
FLOW
Otherwise:
➔ See SYSBOT9
SYSBOT8 MAX SAMPS/BOTTLE
0005
Set maximum number of allowable samples per Bottle
➔ See SYSBOT9
SYSBOT9 BOTTLE CLEANING
NO
[YES]
Select this where a 2 x 4.5 litre Self-Emptying Self-
Cleaning Bottler has been supplied with your S300
Sampler
➔
See SETPROG
Program Settings
IDENT DISPLAY ACTION / COMMENTS
PROGSAM1 SAMPLER SETTINGS
> > > > > > >
Information screen only
➔ See PROGSAM2
PROGSAM2 START ROUTINE

IMMEDIATELY
[21-05-12 15:30]
Set a date / time for the sample routine to commence, or
select IMMEDIATELY. If IMMEDIATELY is selected the
sample routine will start at the time the RUN PROGRAM
button is pressed
➔
See PROGSAM3
PROGSAM3 STOP ROUTINE

NON STOP
[22-05-00 15:30]
Set a date / time for the sample routine to stop, or select
NON STOP
➔
See PROGSAM4 if time between START
ROUTINE and STOP ROUTINE is less than 24
hours and both are within the same day
➔ See PROGSAM5 if SAMPLING MODE is TIME
➔
See PROGSAM6 if SAMPLING MODE is FLOW &
IMPULSE
➔
See PROGSAM7 if SAMPLING MODE is FLOW &
4/20MA
PROGSAM4 REPEAT DAILY

NO
[YES]
If the duration of the sampling routine is less than 24 hours
it can be repeated daily if required
➔
See PROGSAM5 if SAMPLING MODE is TIME
➔
See PROGSAM6 if SAMPLING MODE is FLOW &
IMPULSE
➔
See PROGSAM7 if SAMPLING MODE is FLOW &
4/20MA