Aquamatic Aquacell P2 Series, User Manual

Page: 28 / 78

IN
ST
AL
LAT
ION
3.4
Pressurised Pipeline Interface
The Pressurised Pipeline Interface (PPI) works in conjunction with any of the Aquacell
Sampler range. Providing an interface between the Sampler and a pressurised Sampling
Point, the PPI gives the Sampler the ability to extract representative samples from
pipelines at pressures up to 6 BAR. Further information on the PPI should be found in the
User G
uide Supplement titled ‘Pressurised Pipeline Interface’
Optional Connections
Optional Connections should be set up as follows:
Temperature Probe
Insert the Sample Temperature Probe into the selected Sample Collection Vessel.
Connect the waterproof connector at the end of the probe cable to the appropriate position
on the bottom rear of the Sampler unit
The temperature (including the corresponding time and date) of the composite sample is
recorded every 5 minutes for 24 hours commencing immediately after the first
programmed sample is attempted. For the following 24 hour period the temperature is
recorded every 15 minutes
When specified temperature data can be outputted to a suitable computer or hand held
device via the optional Data Connection, details of how to set this up can be found in
Section ‘Operation > Basic Operations’