167
SV200 DC Hardware Manual
920-0126A
4/14/2017
9.5.2.2 Set IP address from Drive
For Ethernet Version of SV200 Drive, IP address can be viewed and configurated directly from drive’s control panel, parameter
P-80(CO). Please refer to table below for parameter values and its IP address
P-80(CO)
IP address
P-80(CO)
IP address
0
10.10.10.10
8
192.168.0.80
1
192.168.1.10
9
192.168.0.90
2
192.168.1.20
A
192.168.0.100
3
192.168.1.30
B
192.168.0.110
4
192.168.1.40
C
192.168.0.120
5
192.168.0.50
D
192.168.0.130
6
192.168.0.60
E
192.168.0.140
7
192.168.0.70
F
DHCP
Configuration Steps:
Step
LED Display
Panel Control
1
2
In Status diplay mode, press and hold
M
three times to enter
Parameter P mode
3
Use
or
key to scroll, and find parameter P-80(CO)
4
Shot click on
S
to enter parameter edit mode
5
Use
or
key to change the parameter value
6
Press and hold
S
(more than 1s ) to set the parameter
7
Press and hold
M
to enter function control F mode
8
Use
or
key to scroll, and find parameter F-04(SA)
9
Press and hold
S
(more than 1s ) to save the parameter
10
The new IP address will take effect at next power cycle
