Applied Biosystems SimpliAmp Thermal Cycler User Manual Download

Page: 82 / 92

Safety

WARNING!

GENERAL SAFETY. Using this product in a manner not specified

in the user documentation may result in personal injury or damage to the

instrument or device. Ensure that anyone using this product has received

instructions in general safety practices for laboratories and the safety

information provided in this document.

Before using an instrument or device, read and understand the safety

information provided in the user documentation provided by the

manufacturer of the instrument or device.

Before handling chemicals, read and understand all applicable Safety Data

Sheets (SDSs) and use appropriate personal protective equipment (gloves,

gowns, eye protection, etc). To obtain SDSs, see the “Documentation and

Support” section in this document.

Symbols on the instrument

Symbols may be found on the instrument to warn against potential hazards or convey

important safety information. In this document, the hazard symbol is used along with

one of the following user attention words:

• CAUTION! – Indicates a potentially hazardous situation that, if not avoided,

may result in minor or moderate injury. It may also be used to alert against

unsafe practices.

• WARNING! – Indicates a potentially hazardous situation that, if not avoided,

could result in death or serious injury.

• DANGER! – Indicates an imminently hazardous situation that, if not avoided,

will result in death or serious injury.

Symbol

English

Français

Caution, risk of danger
Consult the manual for further safety

information.

Attention, risque de danger
Consulter le manuel pour d’autres

renseignements de sécurité.

Caution, hot surface

Attention, surface chaude

On (marche)

Off

Off (arrêt)

SimpliAmp

™

Thermal Cycler User Guide

Summary of Contents for SimpliAmp Thermal Cycler





























































































Search results

Summary of Contents for SimpliAmp Thermal Cycler

Reviews:

Related manuals for SimpliAmp Thermal Cycler

Brands by name

Popular brands

Applied Biosystems SimpliAmp Thermal Cycler, User Manual

Search results

Summary of Contents for SimpliAmp Thermal Cycler

Reviews:

Related manuals for SimpliAmp Thermal Cycler

Brands by name

Popular brands