3.
Touch Next.
The Run Parameters screen is displayed:
Figure 20
Run Parameters screen
4.
Touch the field under Run ID, then enter the applicable information in the Enter
the Run ID screen.
The default Run ID is YYYYMMDDHHMM, where “YYYYMMDD” is the date
and “HHMM” is the current time.
You can choose to retain the default Run ID.
5.
Touch Add Comment to enter any comments about the run.
6.
Touch Start Run. The cover is heated to the required temperature, then the run
begins.
While the run is in progress, the Home screen is displayed. When the run is
complete, the Status Dial on the Home screen displays Done and Remove
Samples.
7.
Touch Done once you have removed the samples.
The Status Dial is now ready for another run and displays Set Up Run.
Use the Multi-Instrument Setup feature to perform runs on multiple instruments.
1.
In the Multi-Instrument Setup screen, touch the Off and On toggle button to
make the instrument on which you are running an experiment visible to other
instruments on the network.
2.
Touch the second set of Off and On toggle buttons to find other instruments on
the network.
3.
Select an existing or new method and proceed to the Start Run screen.
Perform a run on
multiple
instruments
Chapter 3
Create and run experiments on the instrument
Perform a run
3
SimpliAmp
™
Thermal Cycler User Guide
23
Summary of Contents for SimpliAmp Thermal Cycler
Page 91: ......