manualshive.com logo in svg

Applied Biosystems SimpliAmp Thermal Cycler, User Manual, Page: 67 / 92

Share
Download
Applied Biosystems SimpliAmp Thermal Cycler User Manual Download Page 67

Predefined run methods

The following run methods (distributed across ten categories) are supplied with the

SimpliAmp

™

 Thermal Cycler. A particular run method can appear in more than one

category. These run methods are based on our recommended protocols and should be

considered as starting points for the different applications. Your results may vary

between instrument models, so some optimization may be needed. Please note that

the ramp rates of these methods are set at 100%.
The following table lists the categories and the run methods they include.

Table 12   

Pre-defined categories and run methods

Category

Run method

Blank Template

• General PCR Run Method
• Blank PCR 1
• Blank PCR 2

Basic PCR

• AmpliTaq

™

 360 Method

• AmpliTaq

™

Method

• Basic PCR Taq Method

Hot Start

• AmpliTaq

™

 360 Method

• AmpliTaq Gold

™

 Method

• AmpliTaq Gold

™

 Fast PCR Run Method

• Platinum

®

 Taq DNA Polymerase Method

• Platinum

®

 Taq SuperMix Method

Sequencing

• BigDye

™

 Direct Cycle Sequence Method

• BigDye

™

 Direct PCR Run Method

• BigDye

™

 Kit Fast Run Method

• BigDye

™

 Kit Standard Run Method

Optimization

• Time Release Run Method
• Touchdown PCR Run Method

RT-PCR

SuperScript

®

 III 1-Step System Method

E

SimpliAmp

™

 Thermal Cycler User Guide 

67

Summary of Contents for SimpliAmp Thermal Cycler





























































































Reviews:

No comments