manualshive.com logo in svg

Applied Biosystems SimpliAmp Thermal Cycler, User Manual, Page: 55 / 92

Share
Download
Applied Biosystems SimpliAmp Thermal Cycler User Manual Download Page 55

·

Maintenance & Services: You can perform the following in the Maintenance &

Services screen:

·

Software Update: Touch Software Update to update the System firmware. See 

“Upgrade the system firmware“ on page 34 for instructions on updating the

firmware.

·

Service Reminders: Touch Service Reminders to set the time interval for the

service reminder. Use the Off and On toggle button to turn off and on,

respectively, the service reminder. If you select On, the time interval field

becomes visible. Touch the time interval field to choose from 12 Months, 9

Months, 6 Months, 3 months, and 1 Month. Touch OK to save the change or

Cancel to exit the screen.

·

Self Verification Test: Touch Self Verification Test for the instrument to conduct

a check on the instrument hardware. The check includes testing the block, heated

cover, and other components. See Chapter 4, “Maintain the instrument“ for

instructions on conducting the self-verification test.

·

Export Instrument Log: Touch Export Instrument Log to export the instrument

logs to a USB. Insert the USB into the USB drive before using this feature.

·

Block Verification Test: Touch Block Verification Test to perform a block

verification test. Ensure that you have the Temperature Verification Kit (TVK)

(Cat. No. 4377669) before performing this test. Touch:

·

Verify Block Temperature to carry out the block temperature test.

a. Choose the test type from Heated Cover, Temperature Verification, or

Temperature Non-Uniformity.

b. Touch Next. Connect the TVK, and depending on the test type perform

insert the TVK probe into a specific zone.

c. Touch Start Test.

·

Verify Cycle Performance to check the cycle performance of the instrument.

Appendix A 

Install and connect to a network

Set up the system

A

SimpliAmp

™

 Thermal Cycler User Guide 

55

Summary of Contents for SimpliAmp Thermal Cycler





























































































Reviews:

No comments