manualshive.com logo in svg

Applied Biosystems SimpliAmp Thermal Cycler, User Manual, Page: 89 / 92

Share
Download
Applied Biosystems SimpliAmp Thermal Cycler User Manual Download Page 89

Documentation and support

Related documentation

The following related documents are shipped with the system:

Document

Publication

number

Description

SimpliAmp

™

 Thermal Cycler

Installation and Operation

Quick Reference

A24827

Describes the procedures for

installing and using the SimpliAmp

™

Thermal Cycler that is described in

detail in the SimpliAmp

™

 Thermal

Cycler User Guide.

SimpliAmp

™

 Thermal Cycler

System Documentation

A24828

Provides the reference for accessing

user documentation from the product

website and contact details for service

and technical support.

SimpliAmp

™

 Thermal Cycler

Starter Kit Insert

A24829

Lists the samples of consumables,

necessary to start the SimpliAmp

™

Thermal Cycler, included in the kit and

the ordering information for additional

consumables.

Note: 

For additional documentation, see “Customer and technical support“ on

page 89.

Customer and technical support

Visit thermofisher.com/support for the latest in services and support, including:

• Worldwide contact telephone numbers
• Product support, including:

– Product FAQs
– Software, patches, and updates

• Order and web support

SimpliAmp

™

 Thermal Cycler User Guide 

89

Summary of Contents for SimpliAmp Thermal Cycler





























































































Reviews:

No comments