manualshive.com logo in svg

Applied Biosystems SimpliAmp Thermal Cycler, User Manual, Page: 64 / 92

Share
Download
Applied Biosystems SimpliAmp Thermal Cycler User Manual Download Page 64

The SimpliAmp

™

 Thermal Cycler has a Pollution Degree rating of 2. It may be

installed in an environment that has non-conductive pollutants only, such as dust

particles or wood chips. Typical environments with a Pollution Degree II rating are

laboratories and sales and commercial areas.

The safety of SimpliAmp

™

 Thermal Cycler use was tested for altitudes up to 6000 ft.

Technical specifications

The following table displays the system specifications for the SimpliAmp

™

 Thermal

Cycler.

Table 9   

 SimpliAmp

™

 Thermal Cycler technical specifications:

Feature

Specification

Maximum block ramp rate

[1]

4°C/sec

Maximum sample ramp rate

[1]

3°C/sec

Temperature accuracy

±0.25°C (35 to 99.9°C)

Temperature range for

protocol run

0°C to 100.0°C

Temperature non-uniformity

[2]

<0.5°C

Dimensions

• Height: 21 cm (8.27 in)
• Width: 24.0 cm (9.45 in)
• Depth: 46 cm (18.11 in)

Weight

8.5 kg (18.3 lb)

PCR volume range

• Supported: 10 - 100 µL
• Settable: 1 - 100 µL

Instrument memory

USB, on-board

Display interface

8" color TFT LCD

Power

100-240 V, 50-60 Hz Max: 600 W

VeriFlex

™

 blocks

• 3 VeriFlex

™

 zones

• Supported 10°C (5°C zone-to-zone)
• Settable

[3]

 20°C (10°C zone-to-zone)

Ambient humidity

15% - 80% Relative Humidity, non-condensing

(acceptable range)

Ambient operating

temperature

15°C to 30°C (acceptable range)

Pollution

Altitude

Appendix D 

Instrument specification and layout

Technical specifications

D

64

 SimpliAmp

™

 Thermal Cycler User Guide

Summary of Contents for SimpliAmp Thermal Cycler





























































































Reviews:

No comments