manualshive.com logo in svg

Applied Biosystems SimpliAmp Thermal Cycler, User Manual, Page: 8 / 92

Share
Download
Applied Biosystems SimpliAmp Thermal Cycler User Manual Download Page 8

The Home screen includes the following features:

1. Status dial: The Status dial appearing on the Home screen displays the current

temperature of the block, the time elapsed for a run, and the run status while the

instrument is in use.
When the instrument is not in use, the status dial will show the 'Set Up Run'

display. You can start a run by touching the status dial where it says Set Up Run.

For instructions on starting a run by this method, see “Perform a run“ on

page 22.

2. Sign In: Touch Sign In to create an account or to enter information to sign in to

your account.

• To create a new account:

a. In the Sign In screen, touch Sign Up.

b. In the Create An Account screen, enter your personal information,

create a user name and password, and enter a name for the default

folder that will contain the account information.

c. Touch Create Account

Chapter 2 

Start, sign on, and configure the instrument

Touchscreen menu overview

2

8

 SimpliAmp

™

 Thermal Cycler User Guide

Summary of Contents for SimpliAmp Thermal Cycler





























































































Reviews:

No comments