manualshive.com logo in svg

Applied Biosystems SimpliAmp Thermal Cycler, User Manual, Page: 48 / 92

Share
Download
Applied Biosystems SimpliAmp Thermal Cycler User Manual Download Page 48

You can configure the following instrument settings by touching Settings on the

Home screen:

Note: 

The Manage Users button is visible only when you sign in as an administrator.

·

Instrument Settings: Touch Instrument Settings to set various additional

parameters:
Set the following in the Instrument Settings screen:

Note: 

The Backup/Restore and Restore Factory Settings are available only when

you sign in as an administrator.

·

Instrument Name: Touch the Instrument Name field and, using the text editor,

enter up to 25 alphanumeric characters to identify the instrument.

Note: 

The instrument name cannot have spaces. Separate consecutive characters

with a hyphen or underscore; for example, MyInstrument.

Recommended

instrument

settings

Appendix A 

Install and connect to a network

Set up the system

A

48

 SimpliAmp

™

 Thermal Cycler User Guide

Summary of Contents for SimpliAmp Thermal Cycler





























































































Reviews:

No comments