Applent Instruments Anbai AT8612, User Manual

Page: 68 / 77

68 AT8612 User's Guide
Example:
SEND > led :vol 5.0000
Query Syntax:
LED:VOL?
Query Response:
< float >
Example:
SEND > led:vol?
RET > 5.0000
7.13.2 LED:RES
LED:RES command sets the LED load impedance
Command Syntax:
LED:RES < float >
Parameter:
< float >
Example:
SEND > led :res 20.000
Query Syntax:
LED:RES?
Query Response:
< float >
Example:
SEND > led:res?
RET > 25.000
7.14
OCP subsystem
Table 7-10 OCP subsystem tree
OCP :FILE {FILE0,FILE1,…FILE9}
:RANGE {3A,30A}
:VV {FLOAT}
:VD {FLOAT}
:START {FLOAT}
:STEP {FLOAT}
:SD {FLOAT}
:END {FLOAT}
:OV {FLOAT}
:MAX {FLOAT}
:MIN {FLOAT}
OCP subsystem is used to set up OCP measuring parameter.
7.14.1 OCP:FILE
OCP:FILE Setting up OCP FILE.
Command Syntax:
OCP:FILE < INT >
Parameter:
< INT >
Example:
SEND > OCP :FILE 1
Query Syntax:
OCP:FILE?
Query Response:
< INT >
Example:
SEND > OCP:FILE?
RET > file1
7.14.2 OCP:RANGE
OCP:RANGE command sets the OCP CUR RANGE
Command Syntax:
OCP:RANGE < INT >