Applent Instruments Anbai AT8612, User Manual

Page: 31 / 77

31
31 <MEAS DISPLAY> Page
3.6.3 SEQ PARA

Steps of setting up SEQ PARA
Step 1 Press[Setup] to enter <SETUP> page
Step 2 Press function key [SEQ] to enter <SEQ MEA PAGE> page
Step 3 Choose [SEQ PARA] field by using cursor key;
Step 4
Use soft-key to choose
Soft-keys Function
CC Setting up [CC] mode
CV Setting up [CV] mode
CP Setting up [CP] mode
CR Setting up [CR] mode
3.6.4 TEST MODE

Steps of setting up TEST MODE
Step 1 Press[Setup] to enter <SETUP> page
Step 2
Press soft-key [SEQ ] to enter <SEQ MEA PAGE> page
Step 3 Choose [TESTMODE] field by using cursor key;
Step 4 Use soft-keys to choose
function keys function
CONT Make loop test according to list order.
TRIG
Load will work in the first step initially, when it receives BUS or
external trigger, the instrument will begin list test, after finish one circle,
it will return to the first step.
Under BUS or external trigger, the pulse width of the first step is
infinite.
3.6.5 STEPS Setup

Steps of setting up STEPS
Step 1
Press [Setup] to enter <SETUP> page
Step 2 Press soft-key [SEQ ] to enter <SEQ MEAS PAGE> page
Step 3 Choose [STEPS] field by using cursor key
Step 4 Use numeric keypad to input count value, press [Enter] to confirm.
I
t
2A
1A
TRIG
0
TRIG
3A
4A
5A
Step.1
2
4
3
5