Applent Instruments Anbai AT8612, User Manual

Page: 27 / 77

27
27 <MEAS DISPLAY> Page
3.4.2 Parameter A

Steps of setting up Parameter A
Step 1 Press [Setup] to enter <SETUP> page
Step 2 Press Soft-key [TRN] to enter < TRN MEAS PAGE> page
Step 3 Use Cursor key to choose [ValueA] field;
Step 4
Use Numeric keypad to input parameter value, press [Enter] to confirm.
3.4.3 Pulse Width A

Steps of setting up Pulse Width A
Step 1 Press [Setup] to enter <SETUP> page
Step 2 Press soft-key [TRN] to enter < TRN MEAS PAGE > page
Step 3 Use cursor key to choose[TimingA] field;
Step 4 Use numeric keypad to input parameter value, press [Enter] to confirm.
3.4.4 Parameter B

Steps of setting up Parameter B
Step 1 Press[Setup] to enter<SETUP> page
Step 2 Press soft-key [TRN] to enter < TRN MEAS PAGE> page
Step 3 Use cursor key to choose [ValueB] field;
Step 4 Use numeric keypad to input parameter value, press [Enter] to confirm.
3.4.5 Pulse Width B

Steps of setting up Pulse Width B
Step 1 Press[Setup] to enter<Setup> page
Step 2
Press soft-key [TRN] to enter < TRN MEAS PAGE> page
Step 3 Use cursor key to choose[TimingB] field;
Step 4 Use numeric keypad to input parameter value, press [Enter] to confirm.
3.4.6 Test Mode

Steps of setting up Test Mode
Step 1 Press[Setup] to enter <SETUP> page
Step 2 Press soft-key [TRN] to enter <TRN MEAS PAGE>page
Step 3 Choose [TEST MODE] field by using cursor key;
Step 4 Use soft-key to choose
Soft-keys Function
Continuous
Mode
Under continuous mode, turn on the load, the load will continuously
switch between A and B value, unless the load is turned off.
I
t
B = 10A
A = 5A
3ms 7ms 0 10ms 14ms
3ms 4ms 3ms 4ms