Applent Instruments Anbai AT8612, User Manual

Page: 33 / 77

33
33 <MEAS DISPLAY> Page
3.8
<ATF MEAS PAGE> Page
Press [Setup] key, then press soft-key [ATF] to enter < ATF MEAS PAGE> page.
Automatic Testing Function allows users to make different load integrated measurement of measured power
supply (such as charger and so on). Users can perform CC, CV, CP, CR, SHORT and OPEN to the measured
power supply, users can also perform GD/NG judgment of comparative results.
There are 10 files in Automatic Testing Function file and 20 steps/file.
Figure 3-12 <ATF MEAS PAGE> Page
3.8.1 ATF Files

Steps of setting up listing files
Step 1
Press[Setup] to enter <SETUP> page
Step 2 Press soft-key [ATF] to enter <ATF MEAS PAGE>page
Step 3 Choose [ATF Files] field by using cursor key;
Step 4 Use soft-key to choose
soft-keys Function
File 0 Automatic list File 0
File 1 Automatic list File 1
File 2 Automatic list File 2
File 3 Automatic list File 3
File 4 Automatic list File 4
File 5 Automatic list File 5
File 6 Automatic list File 6
File 7 Automatic list File 7
File 8 Automatic list File 8
File 9 Automatic list File 9
3.8.2 File Setup

Steps of setting up Files
Step 1 Press[Setup] to enter <SETUP> page
Step 2 Press soft-key [ATF] to enter <ATF MEAS PAGE>page
Step 3 Choose [FILE SET] field by using cursor key;
Step 4 Use function key to choose
Soft-keys Function