Applent Instruments Anbai AT8612, User Manual

Page: 56 / 77

56 AT8612 User's Guide
7.7.5 FETCH:RESISTANCE
FETCH:RESISTANCE command is used to retrieve the actual resistance value currently,
unit
Ω
Query Syntax :
FETCH:RESISTANCE
Query Response : < float >
Example :
SEND
>
fetch:res
RET
>
12.000
7.8
BASIC subsystem
Table 7-4 BASIC subsystem tree
BASIC :MODE {CC,CV,CP,CR}
:FUNC {NRM,SHT,TRN,BAT,SEQ,ATF}
:RATE {SLOW,MED,FAST}
:VMAX {FLOAT}
:IMAX {FLOAT}
:PMAX {FLOAT}
:STATE {ON,OFF}
:TRIG {INT,EXT,BUS}
:4W {ON,OFF}
:VON {FLOAT}
:VOFF {FLOAT}
:TIME {FLOAT}
:VALUE <PARA>,<LEVEL>
BASIC subsystem is used to set up the basic parameter of the instrument.
7.8.1 BASIC:MODE
BASIC:MODE command sets the instrument's operating mode.
Command Syntax:
BASIC:MODE <cc,cv,cp,cr >
Parameter:
<cc,cv,cp,cr >
Example:
SEND > basic:mode cc
Query Syntax:
basic:mode?
Query Response:
<cc,cv,cp,cr>
Example:
SEND > basic:mode?
RET > cc
Restriction: Can only be used in conventional testing status
Other command followed by this command will be ignored.
Example: basic:mode cc; *idn? // *idn? command will be ignored.
7.8.2 BASIC:FUNC
BASIC:FUNC command sets the operating function.
Command Syntax:
BASIC:FUNC <nrm,sht,trn,bat,seq,atf>
Parameter:
<nrm,sht,trn,bat,seq,atf>
Example:
SEND > basic:func nrm