Applent Instruments Anbai AT8612, User Manual

Page: 41 / 77

41
41 [Setup] page
4. [Setup] page
This chapter will describe:

<Setup> Page
4.1
<Setup> Page
Users can enter <Setup> Page at any time when pressing <Setup> key.
All setup related to measurement can be finished In <Setup> Page, but the instrument will
not display measuring results nor sorting results, and the instrument is in waiting state.
These parameters include:

Operating Mode – Four basic operating mode Setup

Parameter – Operating parameter Setup

Voltage Range – Voltage Range Setup

Current Range – Current Range Setup

Rate
– Sampling Rate Setup

I-MAX
– Current Upper Limit Setup

V-MAX
– Voltage Upper Limit Setup

P-MAX
– Power Upper Limit Setup

V-On Load
– On Load Voltage Setup

V-Off Load
– Off Load Voltage Setup

Timing-On Load – Timing On Load Time Setup

Trigger
– Trigger Mode Setup

4W Test
– Test Method Setup
Figure 4-1 <Setup> Page
4.1.1 Setting up [Rate]

Steps of setting up Rate
Step 1
Press [Setup] to enter <Setup> page
Step 2 Choose [Rate] field by using cursor key;