Applent Instruments Anbai AT8612, User Manual

Page: 37 / 77

37
37 <MEAS DISPLAY> Page

Steps of setting up LOWER LIMIT
Step 1 Press[Setup] to enter <SETUP> page
Step 2 Press soft-key [ATF] to enter < ATF MEAS PAGE >page
Step 3 Choose [FILE SET] field by using cursor key;
Soft-keys Function
YES Enter < ATF VALUE SET PAGE > Page
Step 4
Choose [LOW] field by using cursor key;
Step 5 Use numeric keypad to input parameter value, press [Enter] to confirm.
* The setup of other STEP is the same as the above.
Example will be given to illustrate how to edit files:
Suppose:
ID Mode Voltage Range Current Range Power Timing
Step 1 CC 5.8-6.2V 0.2A

4W
1s
Step 2 OPEN 5.9-6.3V 0

2W
1s
Step 3 CV 5V 0.2-0.25A 1s
Step 4 CV 3V 0.2-0.25A 1s
Step 5 CV 2V 0.2-0.25A 1s
Step 6 CV 0 0-0.25A 1s
1. Max protection current : 3A
2. Max protection voltage : 18V
3. Max protection power : 150W
4. Steps: 6
5. Steps 1: CC, COMP-V, 0.2A, 1s, UPPER=6.2V, LOW=5.8V
6. Steps 2: OPEN, COMP-I , 0A, 1s, UPPER =0.25A, LOW=0.2A
7. Steps 3: CV, COMP-I, 5V, 1s, UPPER =0.25A, LOW=0.2A
8. Steps 4: CV, COMP-I, 3V, 1s, UPPER =0.25A, LOW=0.2A
9. Steps 5: CV, COMP-I, 2V, 1s, UPPER =0.25A, LOW=0.2A
10. Steps 6: SHORT, COMP-I, 0V, 1s, UPPER =0.25A, LOW=0A
11. Save data in the File 1.
3.10
< LED MEAS PAGE > Page
Press [Setup] key, then press soft-key [LED] to enter < LED MEAS PAGE> page.
Figure 3-14 < LED VALUE SET PAGE > Page