Applent Instruments Anbai AT8612, User Manual

Page: 60 / 77

60 AT8612 User's Guide
:VALUEB <level>,<width>
:RESISTANCE(RES) :VALUEA <level>,<width>
:VALUEB <level>,<width>
:TRIG {CONT,PULS,TRIG}
TRAN subsystem is used to set up transient parameter.
7.9.1 TRAN:CURRENT:VALUEA
TRAN:CURRENT:VALUEA command sets the current transient parameter A.
Command Syntax:
TRAN:CURRENT: VALUEA <level>, <width>
Parameter:
<level>, <width>
Level: transient parameter current A value.
width: transient parameter timing A value.
Example:
SEND > tran:cur:a 1.0000,0.001 //current value
1.0000A, timing 1ms
Query Syntax:
tran:current:valuea?
Query Response:
<level>, <width>
level: transient parameter current A value.
width: transient parameter timing A value.
Example:
SEND > tran:cur:a?
RET > 1.0000,0.001
7.9.2 TRAN:CURRENT:VALUEB
TRAN:CURRENT:VALUEB sets the current transient parameter B.
Command Syntax:
TRAN:CURRENT: VALUEB <level>, <width>
Parameter:
<level>, <width>
level: transient parameter current B value.
width: transient parameter timing B value.
Example:
SEND > tran:cur:b 1.0000,0.001 //current value
1.0000A, timing 1ms
Query Syntax:
tran:current:valueb?
Query Response:
<level>, <width>
level: transient parameter current B value.
width: transient parameter timing B value.
Example:
SEND > tran:cur:b?
RET > 1.0000,0.001
7.9.3 TRAN:VOLTAGE:VALUEA
Setup method is the same as that of current.
7.9.4 TRAN:VOLTAGE:VALUEB
Setup method is the same as that of current.
7.9.5 TRAN:POWER:VALUEA
Setup method is the same as that of current.