Anritsu MG369 C Series, Programming Manual

Page: 39 / 266

Programming with GPIB Commands 2-4 Parameter and Data Entry Commands
MG369xC GPIB PM PN: 10370-10374 Rev. F 2-7
PR Opens the internal pulse
frequency parameter. 5.96 Hz to 25 MHz at 100 MHz pulse clock rate;
2.385 Hz to 4 MHz at 40 MHz pulse clock rate;
0.597 Hz to 1.66 MHz at 10 MHz pulse clock
rate MH, KH, HZ
PSO Opens the phase offset
parameter. -360 to +360 DG
PVT Opens the ALC power slope
pivot point frequency
parameter. Frequency range of the MG369xC model GH, MH, KH, HZ
PW Opens the internal pulse
width1 parameter
(Same as W1). 30 ns to 167 ms at 100 MHz pulse clock rate;
25 ns to 419 ms at 40 MHz pulse clock rate;
100 ns to 1.6 s at 10 MHz pulse clock rate SEC, MS, US, NS
SDD Opens the internal pulse
stepped delay mode step
size parameter. 0 ms to 167 ms at 100 MHz pulse clock rate;
0 ms to 419 ms at 40 MHz pulse clock rate;
0 s to 1.6 s at 10 MHz pulse clock rate SEC, MS, US, NS
SDE Opens the internal pulse
stepped delay mode delay1
stop parameter. 0 ms to 167 ms at 100 MHz pulse clock rate;
0 ms to 419 ms at 40 MHz pulse clock rate;
0 s to 1.6 s at 10 MHz pulse clock rate SEC, MS, US, NS
SDL Opens the internal pulse
stepped delay mode
dwell-time-per-step
parameter. 100 microseconds to 10 s SEC, MS, US
SDS Opens the internal pulse
stepped delay mode delay1
start parameter. 0 ms to 167 ms at 100 MHz pulse clock rate;
0 ms to 419 ms at 40 MHz pulse clock rate;
0 s to 1.6 s at 10 MHz pulse clock rate SEC, MS, US, NS
SDT Opens the step sweep dwell
time parameter. 1 ms to 99 s MS, SEC
SLDF Opens the DF parameter of
the Secondary unit. Frequency range of the Secondary MG369xC
model GH, MH, KH, HZ
SLF0 Opens the F0 parameter of
the Secondary unit. Frequency range of the Secondary MG369xC
model GH, MH, KH, HZ
SLF1 Opens the F1 parameter of
the Secondary unit. Frequency range of the Secondary MG369xC
model GH, MH, KH, HZ
SLF2 Opens the F2 parameter of
the Secondary unit. Frequency range of the Secondary MG369xC
model GH, MH, KH, HZ
SLF3 Opens the F3 parameter of
the Secondary unit. Frequency range of the Secondary MG369xC
model GH, MH, KH, HZ
SLF4 Opens the F4 parameter of
the Secondary unit. Frequency range of the Secondary MG369xC
model GH, MH, KH, HZ
SLF5 Opens the F5 parameter of
the Secondary unit. Frequency range of the Secondary MG369xC
model GH, MH, KH, HZ
SLF6 Opens the F6 parameter of
the Secondary unit. Frequency range of the Secondary MG369xC
model GH, MH, KH, HZ
SLF7 Opens the F7 parameter of
the Secondary unit. Frequency range of the Secondary MG369xC
model GH, MH, KH, HZ
Table 2-2. Parameter Entry Commands (3 of 5)
Mnemonic
Code Parameter Values Units