Anritsu MG369 C Series, Programming Manual

Page: 236 / 266

A-3 Alphabetical Listing
A-8 PN: 10370-10374 Rev. F MG369xC GPIB PM
ODL Returns the internal pulse stepped delay mode dwell-time-per-step
value (in ms) to the controller. 3-70
ODP Returns the internal pulse delay1 value (in ms) to the controller
(Same as OD1). 3-70
ODS Returns the internal pulse stepped delay mode delay 1 start value
(in ms) to the controller. 3-71
OEBW Returns the external reference loop bandwidth to the controller. 3-71
OEM Returns the Extended SRQ Mask bytes (3 binary bytes) to the
controller. 3-71
OES Returns the GPIB Status bytes (3 binary bytes) to the controller. 3-71
OF0 Returns the F0 frequency value (in MHz) to the controller. 3-71
OF1 Returns the F1 frequency value (in MHz) to the controller. 3-72
OF2 Returns the F2 frequency value (in MHz) to the controller. 3-72
OF3 Returns the F3 frequency value (in MHz) to the controller. 3-72
OF4 Returns the F4 frequency value (in MHz) to the controller. 3-72
OF5 Returns the F5 frequency value (in MHz) to the controller. 3-72
OF6 Returns the F6 frequency value (in MHz) to the controller. 3-73
OF7 Returns the F7 frequency value (in MHz) to the controller. 3-73
OF8 Returns the F8 frequency value (in MHz) to the controller. 3-73
OF9 Returns the F9 frequency value (in MHz) to the controller. 3-73
OFD Returns the internal FM deviation value (in Hz) to the controller. 3-73
OFH Returns the high-end frequency value (in MHz) to the controller. 3-73
OFK Returns the internal or external FM lock status to the controller. 3-74
OFL Returns the low-end frequency value (in MHz) to the controller. 3-74
OFM Returns the frequency multiplier parameter. 3-74
OFR Returns the internal FM rate (in Hz) to the controller. 3-74
OFS Returns the external FM sensitivity value (in MHz / V) to the
controller. 3-74
OFW Returns the name of the internal FM waveform to the controller. 3-74
OI Returns the instrument identification string to the controller. 3-75
OL0 Returns the L0 power level value to the controller. 3-75
OL1 Returns the L1 power level value to the controller. 3-75
OL2 Returns the L2 power level value to the controller. 3-75
OL3 Returns the L3 power level value to the controller. 3-76
OL4 Returns the L4 power level value to the controller. 3-76
OL5 Returns the L5 power level value to the controller. 3-76
OL6 Returns the L6 power level value to the controller. 3-76
OL7 Returns the L7 power level value to the controller. 3-76
OL8 Returns the L8 power level value to the controller. 3-77
OL9 Returns the L9 power level value to the controller. 3-77
OLO Returns the level offset power value to the controller. 3-77
Table A-1. Alphabetical GPIB Command List (7 of 13)
Command Code Function Page