Analog way ASC1602-4K User Manual Download Page 6

Page: 6 / 127

1. Trademarks

1. TRADEMARKS

2. INTRODUCTION

The terms HDMI, HDMI High-Definition Multimedia Interface and the HDMI Logo are trademarks or registered

trademarks of HDMI Licensing LLC in the United States and other countries.

Thank you for choosing an Analog Way

LiveCore™ unit

. Before you start setting up your

LiveCore™ unit

for

the first time, please read through all of the documentation to become familiar with its powerful features.

LiveCore™ unit

can be used in several configurations, which results in a versatile video production tool for

live event staging and fixed installation applications.

Go on our website to register your product(s) and

be notified about new firmware versions:

http://www.analogway.com/en/support/product-registration/

Summary of Contents for ASC1602-4K
































































































































Search results

Summary of Contents for ASC1602-4K

Reviews:

Related manuals for ASC1602-4K

Brands by name

Popular brands

Analog way ASC1602-4K, User Manual

Search results

Summary of Contents for ASC1602-4K

Reviews:

Related manuals for ASC1602-4K

Brands by name

Popular brands