Analog way ASC1602-4K, User Manual

Page: 14 / 127

14
4.4 Cable and adaptor information
A large choice of cables and adaptors are compatible with the LiveCore™ unit . Please refer to the hardware
specifications chapter to find the most suitable cables for your operations.
For each type of signal, here are the levels and the impedance accepted by the LiveCore™ unit .
4.4 Cable and adaptor information
4.5 Hardware specifications
4.5.1 Signal descriptions
Type Levels Impedance
Composite 0,7 Vpp + 0,3 Vpp 75 Ω
S. Video Y = 0,7 Vpp + 0,3 Vpp
C = 0,7 Vpp
75 Ω
YUV Y = 0,7 Vpp + 0,3 Vpp
U = 0,7 Vpp
V = 0,7 Vpp
75 Ω
RGsB R = 0,7 Vpp
G = 0,7 Vpp + 0,3 Vpp
B = 0,7 Vpp
75 Ω
RGBS
R, G, B = 0,7 Vpp R, G, B = 75 Ω
S = 0,3 Vpp 75 Ω
or
S = TTL
Type Levels Impedance
YUV Y = 0,7 Vpp + 0,3 Vpp
U = 0,7 Vpp
V = 0,7 Vpp
75 Ω
RGsB R = 0,7 Vpp
G = 0,7 Vpp + 0,3 Vpp
B = 0,7 Vpp
75 Ω
RGBS
R, G, B = 0,7 Vpp R, G, B = 75 Ω
S = 0,3 Vpp 75 Ω
or
S = TTL
Type Characteristics
SD-SDI YUV - 10 bits – 4.2.2 - 270 Mb/s
No payload ID management
Only A-level type
DVI RGB ou YUV – 8 bits – 4.4.4 – 16/235 - TMDS
HDMI RGB or YUV – 10 bits – 4.4.4 or 4.2.2
– 16/235 – TMDS
DisplayPort RGB or YUV – 10 bits – 4.4.4 or 4.2.2
– 16/235 – Main Link
Type Characteristics
DVI RGB or YUV – 8 bits – 4.4.4 – 16/235 - TMDS
HDMI RGB or YUV – 10 bits – 4.4.4 or 4.2.2
– 16/235 – TMDS
DisplayPort RGB or YUV – 10 bits – 4.4.4 or 4.2.2
– 16/235 – Main Link
Analog SDTV
Analog EDTV
Digital SDTV
Digital EDTV
Dismantling front handles of the device could invalidate warranty on after-sales services of your
LiveCore™ unit . It is strongly advised to avoid using front handles as rests for your LiveCore™
unit , they are designed for manipulation purposes only.
If required, front handles of the device can be dismantled, but with caution. The original screws removed
must not be reintroduced to their location without handles in place. Substantial damages can occur,
including risk of electric shock from the main voltage. Only M4x12mm screws can be used. They are
supplied with the unit.