Analog way ASC1602-4K, User Manual

Page: 89 / 127

89
7.4.5 Preset load and save management
Save a preset
Once your layers are set up, you can save your current screen configuration in
one of the 144 preset memory slots available. Click on SAVE MODE at the top
of the Preset Mem . toolbar and then click on a preset slot number to save the
current screen configuration as a preset. If you accidentally attempt to save
over an existing preset, a warning and confirmation message will pop-up:
You can also double-click on SAVE MODE to lock save mode when saving
presets. The SAVE MODE button will blink while the save mode is enabled.
Make sure to de-select SAVE MODE to unlock save mode when finished
saving.
Load a preset
Simply click on a preset slot number when save mode is disabled to load the
preset.
You can use the Memories Overview box at the bottom of the Preset Mem .
toolbar to review the content of your presets:
- Hover over a preset to have an overview of the preset.
- SHIFT+click on a preset to label the preset.
- SHIFT+click on a preset and click twice on the Reset button to delete
the preset.
Use filters
You can use the Filter feature to load a subset of the preset information, like
the border property of layers only, or the size and position of layers but not
their sources, or the native background and the transparency but not the
flying curve effect, etc.
To use the Filter feature, click on the
Filter button at the top right corner
of the Preset Mem. toolbar and select
the filter(s) to apply when the preset
is loaded. Then click on the preset to
load the preset with the selected fil -
ters applied.
The Save selected filters in Memory box allows you to save a preset with the
selected filters already applied (i.e. no need to select the filters to apply at
load for this preset: the filters will be automatically applied when the preset is loaded).
The «truncated» preset memory icon allows you to quickly review which presets have filters already
applied. To check which filters, SHIFT+click on the preset and hover over the filters information icon:
- (x) Filter_name:
the filter has been saved and will be automatically applied when the preset is loaded.
- ( ) Filter: the filter has not been saved and cannot be applied when the preset is loaded.
7.4.5 Preset load and save management