Amylior LOGOSILVER OUTCHAIR L, Owner'S Manual

Page: 56 / 76

P·56
8.7. OTHER OPTIONAL ELEMENTS
The other options or adjustments will be added to this notice as a related addendum in
this chapter.
IX. MALFUNCTION AND
TROUBLESHOOTING
9.1. DIAGNOSIS AND TROUBLESHOOTING
Electronic repairs should only be carried out by authorized service providers. Improper or
incorrect repair can result in an unsafe adjustment to the wheelchair. Logo Silver accepts
no responsibility or losses or damages of any kind that could result from any improper or
incorrect repair carried out.
The electronic system can detect any unusual circumstances concerning motors, brakes,
wiring or the electronics module itself. The security code number is indicated by a flashing
error message with this code.
Depending on the severity, the system may allow or prohibit driving. In some cases, driving
is only possible at reduced speed.
Display of safety circuit codes:
When the safety circuit begins to prevent wheelchair movement, a diagnostic screen will
appear, or an LED will flash.
• You can solve simple problems by performing an online diagnosis on:
http://support.pgdt.com/Online-Diagnostics/Trip-Codes/R-net-Trip-Code-Database.
aspx
• In case of difficulties, contact your provider and give them the information that appears
on the screen, so that they can assist you in solving the problem.
In addition, the following should be verified if possible:
• Turn off the joystick
• Make sure all connectors are securely connected and no wires are stuck
• Check that the engine brake is engaged
• Turn on the joystick and try driving the wheelchair again. If the security circuit launches
again, switch off the chair and do not try use it again.
No security code displayed:
If the wheelchair cannot move or if it moves at a reduced speed while no security code is
displayed on the screen, it is likely that one of the lock switches has been activated for your
safety.
Lock switches include; the seat inclination, the reclining backrest, the caster release.