Amylior LOGOSILVER OUTCHAIR L, Owner'S Manual

Page: 61 / 76

P·61
10.2.5. Preventative Maintenance
Before using your chair in a moist or corrosive environment, it is advised you protect it
by carefully coating all metal surfaces with a waterproofing product. This product may for
example be an oil-based aerosol (such as WD40) or a lanolin-based dispersant (such as
Lanotec). This coating should act as a barrier between the water and the painted metal
surfaces of your electric wheelchair. A lubricant (such as WD40) can be sprayed onto the
tilt mechanisms to protect them.
The underside of the wheelchair (battery compartment and frame components) can also be
sprayed with the aid of a ramp or another approved lifting device.
10.3. DAILY CHECKS
Joystick: Once the control system is turned off, check that the joystick is not distorted or
damaged and that it returns to the center when you release it. Make sure that the joystick
boot is not torn or cracked and that all electrical connections are properly carried out.
DANGER!
Do not use the joystick if the boot is torn or cracked. If the joystick
boot is torn or cracked, have it replaced IMMEDIATELY.
WARNING!
Your wheelchair is equipped with electric motors and must NEVER be
driven into water, a river, a stream or the sea.