Amylior LOGOSILVER OUTCHAIR L, Owner'S Manual

Page: 38 / 76

P·38
Symbol Indication Description
Action Mode
Displays the sections of the chair selected for movement.
Bluetooth mode
When Bluetooth mode is enabled, the following screen
is displayed.
Message Window
The R-net Control System displays warning icons and
informational messages in an allocated message window.
Restart
The control system requires a restart.
Timer
This symbol appears when the control system is moving
from one state to another.
Standby
This symbol will be displayed for a short time before
the R-net goes on standby.
Checkmark
Process performed correctly (check mark).
Cross
Process not performed correctly (cross mark).
E-stop
If you have an external profile switch and you turn it on
while operating your chair or an actuator, the action will
stop, and this symbol will be displayed.
Displaced joystick
If you manipulate the joystick before or just after turning
on the control system, the displaced joystick icon will
flash on the screen.
If you do not return the joystick to the central position
within five seconds, your chair will not move.
Turn off the control system and turn it back on to reset it.
Locked control
system
The control system can be locked using a sequence of
joystick movements or with a physical key.
See «Locking the Control System» for a detailed
description of the locking and unlocking procedures.
Diagnostics
Screen
When the safety circuit begins preventing wheelchair
movement, the diagnostic screen is displayed.