Amylior LOGOSILVER OUTCHAIR L, Owner'S Manual

Page: 34 / 76

P·34
7.7.3. Switching on
The electronic system will turn on if:
• The circuit breaker is armed (if model with circuit breaker)
• The joystick is on
• The electromagnetic brakes must be engaged otherwise the wheelchair will not move
7.7.4. Switching off
• Turn off the joystick
• Check that the brakes are engaged so that the wheelchair does not move
• Be careful not to leave the chair at a standstill with empty batteries as this could affect
its autonomy.
7.8. JOYSTICK CONTROL
The joystick controls can be personalized, and different models are available depending on
the needs of the user.
7.8.1. Joystick
The joystick controls the speed and direction of the wheelchair. Push the joystick in the
direction of your choice. The more you incline it, the faster you will go. When you release
the joystick, the chair will automatically brake and stop.
7.8.2. Powering the joystick
If the wheelchair does not move as intended, release the joystick immediately and turn off
the chair. Unless the joystick is damaged, the chair should stop.
If the joystick is not in the neutral (centered) position when you start the chair, you risk
causing a system malfunction. Release the joystick and restart the chair to reset the system.
7.8.3. Rain and water
The joystick box is NOT WATERPROOF. The joystick module resists splashes but can be
irreparably damaged if water passes through the rubber seals (such damage is not covered
by the warranty). We recommend carrying a plastic bag large enough to cover the joystick
module and the user’s hand in case of rain.
WARNING!
Always turn the chair off when at a standstill to avoid unexpected
movement.