Amylior LOGOSILVER OUTCHAIR L, Owner'S Manual

Page: 44 / 76

P·44
7.8.8.4. Pairing the CJSM-BT
Enter the «CJSM2 Setup» menu and select «Bluetooth». The names of the preprogrammed
devices should appear. Logo-Silver has preprogrammed the following devices:
• iPad
• iPhone
• PC
• Android device: Press and hold the top left screen button (Danger button) for 1
second to enter the settings menu.
To start the pairing process, turn on the device by pushing the joystick to the right.
After turning on the device, turn on the controller. Select the item you wish to pair by scrolling
through the drop-down menu, and select the device by pushing the joystick to the right.
7.8.8.5. “Discovery” Mode
• Push the joystick forward for 10 seconds until it sounds, then pull it back until it
sounds. There should now be a blinking Bluetooth icon on the CJSM2 screen. This
means that the CJSM2 is detectable.
• Select the device (e.g. Tom’s iPad) to connect and search for Bluetooth devices; this
launches the connection to the R-net. Once connected, «Tom’s iPad» will appear in the
Connected Devices window and you will be able to navigate from the iPad using the
CJSM2-BT from the R-net.
• To connect to an additional device (e.g. Tom’s PC), select the device and repeat the
process above. Up to four devices can be connected.
Selection of different connected devices:
Once the devices are paired, they will stay connected to the R-net. When entering the «My
Devices» mode, the last device connected will always be the option selected in the menu. To
select another device, scroll to the desired device and push the joystick to the left or right.
After a few seconds, a fixed Bluetooth icon will appear on the CJSM2 screen, and navigation
from the new device will begin.