Amylior LOGOSILVER OUTCHAIR L, Owner'S Manual

Page: 27 / 76

P·27
1 2
3
Fig. 7
The wheelchair motors are equipped with magnetic brakes that prevent the wheelchair from
rolling on its own when it is at a standstill. The engine brakes are automatically tightened
when the joystick is in the neutral or “off” position. To push the wheelchair, disengage the
magnetic brakes.
A lever for disengaging the brakes of the rear wheels is located above the rear engines:
• When disengaged, the engine brakes are turned off. You must therefore be careful that
the wheelchair does not move in an uncontrolled manner if the ground slopes.
• Always remember to return the release levers to the «on» position after extensive use.
Motor brake release (Fig. 6):
• Turn off the remote.
• Turn the right motor button clockwise and the left motor button counter clockwise.
Motor brake clutch (Fig. 6):
• Turn the right motor button counter clockwise and the left motor button clockwise.
If you need to, push the wheelchair by hand to disengage the rear engines and manually
position the front wheels in the desired direction.
7.5. ADJUSTMENT POSSIBILITIES
7.5.1. Armrest adjustments
1 - Height adjustment of the armrest according to arm length
2 - Depth adjustment of the armrest
3 - Width adjustment of the armrest
DANGER!
After each adjustment, be sure to tighten the nuts and screws
securely.