Adding Devices to the System
52
VisualArchitect v1.1
CONFIDENTIAL AND PROPRIETARY. COPYRIGHT, AMX LLC, 2006
Selecting AMX User-Interface Devices
Once you have selected a NetLinx Central Controller, it is a good time to specify one or more AMX
User-Interface devices.
User-Interface Devices include AMX Touch Panels and AMX Keypads.
Every VA project/system requires at least one AMX User-Interface device.
If you started your project with the Basic System Assistant, you can select one Touch Panel
and up to two Keypads in the Basic System Assistant dialog. The Basic System Assistant
dialog also provides the opportunity to select a Template to apply to the Touch Panel.
Select
File > New > Basic System Assistant
to launch the Basic System Assistant
dialog, which helps to streamline the initial setup of the control system, based on Project
information and AMX Equipment (NetLinx Central Controller and Touch Panel/Keypad)
selections.
If you started your project with the New Empty System option, you will select and add User-
Interface device(s) from the Toolbox:
Select
File > New > New Empty System
to create a new system, without any devices
except the (default) NI-3000 NetLinx Central Controller. At this point you can define the
rest of the system as desired.
1.
To add a Touch Panel, open the Touch Panels tab of the Toolbox, and drag-and-drop the desired
touch panel onto the System diagram.
2.
To add a Keypad, open the Keypads tab of the Toolbox, and click and drag-and-drop the desired
keypad onto the System diagram.
3.
To add a Remote, open the Remotes tab of the Toolbox, and click and drag-and-drop the desired
remote controller onto the System diagram.
Removing Devices
There are several ways to remove devices via the System diagram:
Right-click on device in the System diagram and select Delete from the System Diagram
context menu.
Select a device in the System diagram and select Delete from the Edit menu.
Select a device in the System diagram and click the Delete toolbar button.
Select a device in the System diagram and press the Delete key.
Alternatively, you can use the Device list in the System Tree to select and delete devices from the
System:
Right-click on device in the System Tree and select Delete from the System Tree context
menu.
Select a device in the System Tree and select Delete from the Edit menu.
Select a device in the System Tree and click the Delete toolbar button.
Select a device in the System Tree and press the Delete key.
The program will prompt you to verify this action before the device is removed from the system. Click
the
Don't Show Again
option in the Remove Element dialog to avoid being prompted again.
When adding video touch panels (including any of the wired Modero panels), VA
(v1.1 or higher) automatically adds the appropriate NXA-AVB Breakout box to the
System diagram at the time that the panel is added. Also, note that included
accessories cannot be removed from the system.