Setting Device Properties
86
VisualArchitect v1.1
CONFIDENTIAL AND PROPRIETARY. COPYRIGHT, AMX LLC, 2006
Enter Host Name:
NetLinx
3.
When prompted to enter an
IP Type
, the entry defaults to DHCP but you can assign either a DHCP
or Static IP Address to the target Master.
To Assign a DHCP Address
1.
Enter IP type. Type
D
for DHCP or
S
for Static IP and then Enter:
DHCP
If you press <ENTER> the setting remains defaulted to pull a DHCP Address from the DHCP
Server.
2.
Enter IP type. Type
D
for DHCP or
S
for Static IP and then Enter:
DHCP
3.
When prompted to enter a Gateway IP, press <ENTER> to accept the default setting and display the
entered information:
Enter Gateway IP: 192.168.5.2
You have entered: Host Name NetLinx
Type DHCP
Gateway IP 192.168.99.3
4.
When prompted to confirm that the previous information was correctly entered, you can either
accept the default y (yes) and press <ENTER> or change the entry to n (no) to repeat the process:
Is this correct? Type Y or N and Enter -> y
Settings written. Device must be rebooted to enable new settings.
5.
Incorporate the new settings by cycling power to the unit.
To Assign a Static IP Address
1.
Enter IP type. Type
D
for DHCP or
S
for Static IP and then Enter:
Static
If you type in S or Static and press <ENTER>, you are then prompted to enter the pre-reserved IP
Address, Gateway, and Subnet Mask information. This information can be obtained from your
System Administrator.
Enter IP Address: 192.199.99.2
Enter Subnet Mask: 255.255.255.0
Enter Gateway IP: 192.199.99.3
2.
After you have completed entering the Gateway IP Address, the previously entered information is
then displayed.
You have entered: Host Name NetLinx
Type Static IP
IP Address 192.199.99.2
Subnet Mask 255.255.255.0
Gateway IP 192.199.99.3
3.
When prompted to confirm that the previous information was correctly entered, you can either
accept the default
y
(yes) and press <ENTER> or change the entry to
n
(no) to repeat the process:
Is this correct? Type Y or N and Enter -> y
Settings written. Device must be rebooted to enable new settings.