Setting Device Properties
89
VisualArchitect v1.1
CONFIDENTIAL AND PROPRIETARY. COPYRIGHT, AMX LLC, 2006
Mio Modero Keypad Device Addressing
1.
If connected, disconnect the power supply.
2.
Locate the 8-position Device DIP switch on the rear panel.
3.
Set the DIP switch according to the switch values shown below:
The device number is set by the total value of DIP switch positions that are ON.
If you later change the device number, remove and reconnect the AXlink power connector to
enter the new device number into memory.
Switch
1
2
3
4
5
6
7
8
Value 1
2
4
8
16
32
64
128