Setting Device Properties
88
VisualArchitect v1.1
CONFIDENTIAL AND PROPRIETARY. COPYRIGHT, AMX LLC, 2006
7.
Click
Update
to save any changes. If your changes are successfully updated to the Master, the
following message appears. "
Network Settings updated. Device must be rebooted for the setting to
take effect
".
8.
Return to the System menu by clicking on the purple System icon (within the Online Tree), click the
Reboot
button, and then allow the Master a short time to reboot itself.
9.
Click on the
Refresh
macro from the browser's menu bar. If no security is currently enabled on the
target Master, you are directed back to the Manage WebControl Connections page. If security is
enabled, you are directed to the initial Username/Password page to enter your access information.
Step 3: Change the System Number via the System Menu
1.
Click the
Manage System
link (from within the System Settings section of the Navigation frame).
2.
Click on the purple System icon from within the Online Tree to open the System menu buttons
within the right frame.
3.
Click the
System Number
button to open the Change System Number dialog. This dialog shows
the current system number (read-only) on the target Master.
4.
Enter a new numeric value into the
New Device Number
field.
5.
Click the
Update
button to save this new value to the device. The following message; "Device
number changed to XXX. Device must be rebooted for the change to take effect.", reminds the user
that the Master must first be rebooted before the new settings take effect.
Step 4: Reboot the Master via the System Menu
1.
Click the
Manage System
link (from within the System Settings section of the Navigation frame).
2.
Click on the purple System icon (within the Online Tree) to open the System menu buttons within
the right frame.
3.
Click the
Reboot
button to remotely reboot the target Master. No dialog appears while using this
button. The Online Tree then reads "Rebooting...". After a few seconds, the Online Tree refreshes
with the current system information (showing the newly updated system number).
If the Online Tree contents do not refresh within a few minutes, press the browser's
Refresh
button
and reconnect to the Master.
Modero Touchpanels Device Addressing
1.
Press the grey Front Setup Access button for 3 seconds to open the Setup page
2.
Press the
Protected Setup
button (located on the lower-left of the panel page) to open the Protected
Setup page and display an on-screen keypad.
3.
Enter
1988
into the Keypad's password field and press Done when finished.
4.
Press the red Device Number field to open the Device Number keypad.
5.
Enter the Device Number value for the panel into the Device Number Keypad.
6.
Press
Done
to close the keypad, assign the number, and return to the Protected Setup page.
7.
Press the on-screen
Reboot
button to restart the panel and incorporate any changes.