manualshive.com logo in svg

AMX Modero Viewpoint MVP-5200i, Operation/Reference Manual

Share
Download
AMX Modero Viewpoint MVP-5200i Operation/Reference Manual Download Page 74

Protected Setup Pages

66

MVP-5200i Modero Viewpoint Widescreen Touch Panel

Wireless Settings Page

Use the options on the 

Wireless Settings

 page (FIG. 58) to configure communication settings for the 

wireless CF card (802.11b/g), and read the device number assigned to the panel. 

Features on this page include:  

FIG. 58  

Wireless Settings page (reads from and assigns values to the WAP)

Wireless Settings Page 

Back:

Saves all changes and returns to the previous page.

Connection Status icon:

The icon in the upper-right corner of each Protected Setup page provides a 
constant visual indication of current connection status.

Note

: a Lock appears on the icon if the panel is connected to a secured NetLinx 

Master.

IP Settings:

Sets the IP communication values for the panel:

DHCP/STATIC

Sets the panel to either DHCP or Static communication modes. 
•

DHCP 

- a temporary IP Addresses is assigned to the panel by a DHCP 

server. If DHCP is selected, the other IP Settings fields are disabled (see 
below).

•

Static IP

 is a permanent IP Address assigned to the panel. If Static IP is 

selected, the other 

IP Settings 

fields are enabled (see below).

IP Address

Enter the secondary IP address for this panel.

Subnet Mask

Enter the subnetwork address for this panel.

Gateway

Enter the gateway address for this panel.

Host Name

Enter the host name for this panel.

Primary DNS

Enter the address of the primary DNS server used by this panel for host name 
lookups.

Secondary DNS

Enter the secondary DNS address for this panel.

Domain

Enter a unique name to the panel for DNS look-up.

MAC Address

This unique address identifies the wireless Ethernet card in the panel (read-
only). 

Active Roaming on 
Channels 1&11

When enabled, connection allows active roaming between WAPs by switching 
between channels 1 and 11 if the other channel is unavailable.

Summary of Contents for Modero Viewpoint MVP-5200i











































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands