manualshive.com logo in svg

AMX Modero Viewpoint MVP-5200i, Operation/Reference Manual

Share
Download
AMX Modero Viewpoint MVP-5200i Operation/Reference Manual Download Page 12

Introduction

4

MVP-5200i Modero Viewpoint Widescreen Touch Panel

Memory

The MVP-5200i comes with 128MB of Mobile DDRAM memory and 256 MB NAND Flash memory. 
Neither may be upgraded.

Table Charging Station Connector Locations

With the unit facing you, the mini-USB port (for programming and downloading firmware as well as 
connecting USB headphones using the AMX-provided adaptor cable) and the DC power port are located 
on the lower left side of the device (FIG. 3). The connector for the Table Charging Station (please refer 
to the 

Table Charging Station 

section on page 9) is located on the bottom of the device. 

In addition to its speaker, the MVP-5200i also utilizes its mini-USB port as a connector for standard 
headphones or headsets. These headphones must use a mini-USB plug or adaptor in order to utilize this 
feature.

MVP-5200i Specifications (FG5966-01, FG5966-02) (Cont.)

Other AMX Equipment:

• MVP-TCS-52: Table Charging Station (

FG5966-1X

)

• MVP-WCS-52: Wall Charging Station (

FG5966-1X

)

• MVP-BP-5X: Battery Replacement Kit (

FG5966-27

) 

• MVP-STYLUS-52-GB: Black Replacement Stylus, Pack of 3 (

FG5966-21

) 

• MVP-STYLUS-52-GW: White Replacement Stylus, Pack of 3 (

FG5966-22

)

• CC-USB: USB Programming Cable (

FG10-5965

)

• MVP-HP USB 1/8" Adapter (

FG5966-23

)

This device complies with FCC Part 15 and Industry Canada RSS 210 subject to the 
following conditions: 
1. This device must not cause harmful interference and 
2. This device must accept all interference, including interference that interferes with 
the operation of this device. 

FIG. 3  

MVP-5200i side view with programming port

Front

Mini-USB port

DC power port

Table Charging
Station Connector

Although firmware upgrades can be conducted over a wireless Ethernet connection, 
transferring firmware KIT files over a direct USB connection is recommended, and 
only when the panel is connected to a power supply. If battery power or wireless 
connection fails during a firmware upgrade, the panel flash file system may become 
corrupted.

While standard input/output headsets may be used in lieu of headphones, the 
headset may only be used for output. While you may receive sound from the headset, 
its microphone will not function. Always use the MVP-5200i’s microphone for 
receiving sound.

Summary of Contents for Modero Viewpoint MVP-5200i











































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands