manualshive.com logo in svg

AMX Modero Viewpoint MVP-5200i, Operation/Reference Manual

Share
Download
AMX Modero Viewpoint MVP-5200i Operation/Reference Manual Download Page 62

Setup Pages

54

MVP-5200i Modero Viewpoint Widescreen Touch Panel

Panel Information Page

The Panel Information page provides detailed panel information (FIG. 50).  

Features on this page include:  

FIG. 50  

Panel Information page

Panel Information Page 

Back:

Saves all changes and returns to the previous page.

Connection Status icon:

The icon in the upper-right corner of each Setup page provides a constant 
visual indication of current connection status.

Note

: a Lock appears on the icon if the panel is connected to a secured NetLinx 

Master.

Panel Type:

Displays the model of the panel being used.

Firmware Version:

Displays the version number of the G4 firmware loaded on the panel.

Setup Port:

Displays the setup port information (value) being used by the panel.

High Port:

Displays the high port (port count) value for the panel.

High Address:

Displays the high address (address count) value for the panel.

High Channel:

Displays the high channel (channel count) value for the panel.

High Level:

Displays the high level (level count) value being used by the panel.

Serial Number:

Displays the specific serial number value assigned to the panel.

Setup Pages Version:

Displays the type and version of the Setup pages being used by the panel.

Screen Width:

Displays the screen width (in pixels). MVP-5200i = 640 pixels.

Screen Height:

Displays the screen height (in pixels). MVP-5200i = 480 pixels.

Screen Refresh Rate:

Displays the video refresh rate applied to the incoming video signal.

Screen Rotation:

Displays the degree of rotation applied to the on-screen image.

Power Up Page:

Displays the page assigned to display after the panel is powered-up.

Start Up String:

Displays the start-up string.

Wake Up String:

Displays the wake up string used after an activation from a timeout.

Sleep String:

Displays the sleep string used during a panel’s sleep mode.

File System:

Displays the amount of Compact Flash memory available on the panel.

RAM:

Displays the available RAM (or Extended Memory module) on the panel.

Panel Start Time:

Displays the time taken by the panel to wake up from sleep mode.

Bulb Hours:

Displays the number of hours elapsed with the display on full power.

Summary of Contents for Modero Viewpoint MVP-5200i











































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands