manualshive.com logo in svg

AMX Modero Viewpoint MVP-5200i, Operation/Reference Manual

Share
Download
AMX Modero Viewpoint MVP-5200i Operation/Reference Manual Download Page 42

Configuring Communication

34

MVP-5200i Modero Viewpoint Widescreen Touch Panel

Ethernet over USB

The MVP-5200i device is the first G4 device to support a new Ethernet over USB driver for panel 
downloads and firmware updates. This means that the device can connect to a host computer for updates 
through its Mini USB port instead of through a standard Ethernet port (FIG. 28).

Because of its Ethernet over USB capabilities, the MVP-5200i also follows a different procedure for 
downloading firmware than with other G4 devices. Firmware downloads require use of the USB 
Programming Cable (

FG10-5965

) and a computer running Windows XP.

Touch panel setup

To prepare the MVP-5200i for Ethernet for USB communication:

1.

Turn on the MVP-5200i and wait for the device to finish booting up.

2.

Insert the mini-USB end of the USB Programming Cable into the mini-USB port on the device. 
Insert the other end into the appropriate USB port on the computer containing the files to be 
downloaded.

3.

If the connection goes well, the Windows XP machine will detect the device as an unsupported USB 
device. It then presents a dialogue box that prompts the user for a suitable driver (FIG. 29):

4.

Select 

Yes, this time only

 and click on 

Next

.

5.

In the new window:

 

- Select 

Use the following IP Address

.

 

Under 

IP address

, provide an IP address. Ensure that it is in the same subnet as the IP address 

given to the usb0 interface on the MVP-5200i, but make sure that it has a different node 
number. The IP address 

cannot

 be the same as the panel`s USB IP address.

 

Under 

Subnet mask

, set the suitable subnet mask.

FIG. 28  

USB Port on the MVP-5200i

FIG. 29  

Found New Hardware Wizard dialogue box

Mini-USB Port

Summary of Contents for Modero Viewpoint MVP-5200i











































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands