manualshive.com logo in svg

AMX Modero Viewpoint MVP-5200i, Operation/Reference Manual

Share
Download
AMX Modero Viewpoint MVP-5200i Operation/Reference Manual Download Page 115

Programming

107

MVP-5200i Modero Viewpoint Widescreen Touch Panel

Programming

Overview

You can program the MVP-5200i, using the commands in this section, to perform a wide variety of 
operations using Send_Commands and variable text commands. 

A device must first be defined in the NetLinx programming language with values for the Device: 
Port: System 

(in all programming examples - 

Panel

 is used in place of these values and represents all 

Modero panels).

Navigation Wheel Programming

The navigation wheel on the front of the MVP-5200i has multiple programming functions. The device 
has four buttons mounted underneath the wheel, assigned as, select, left, right, top, and bottom. These 
buttons are fully programmable.

The wheel itself is also fully programmable. The wheel generated two pulses as it rotates. The phase 
difference between these pulses determines the direction of the rotation, and these periods can be a 
measure of its speed. A one-third rotation of this wheel causes a level change.

Navigation Wheel-Specific Commands

This command is used in NetLinx Studio and is case insensitive. 

Verify you are using the latest NetLinx Master and Modero firmware, as well as the 
latest version of NetLinx Studio and TPD4. 

Navigation Wheel-Specific Commands

^WLD-<LED 
NUM>,<ACTION>
<Brightness>

Set the Sleep 
Blink LED 

 

behavior.

<LED NUM> indicates the channel code or ID number associated with an external LED to 
be controlled. In Systems with one external LED, this field should be ignored.
<ACTION> indicates the expected behavior of the LED.  For more information, please 
refer to the Navigation Wheel behavior in each Power Mode table on page 6.

0 – LED OFF                Turns LED Off
1 – LED ON                  Turns LED On
2 – LED Resume          Restores operation of LED.
3 – LOW BRIGHTNESS Sets the low brightness value for LED when operating on 
battery.
4 – HIGH BRIGHTNESS Sets the high brightness value for LED when operating on 
external power or docked.

<Brightness> Value ranges from 0 to 100. This field is ignored when action is 0,1,or2.
Examples:

 ^WLD-0,1,0

Turns the Led On

 ^WLD-0,2,0

Resumes the operation of the LED.

Summary of Contents for Modero Viewpoint MVP-5200i











































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands