manualshive.com logo in svg

AMX Modero Viewpoint MVP-5200i, Operation/Reference Manual

Share
Download
AMX Modero Viewpoint MVP-5200i Operation/Reference Manual Download Page 179

Battery Life and Replacement

171

MVP-5200i Modero Viewpoint Widescreen Touch Panel

4.

Carefully remove the back of the device and detach the battery lead at the battery connector 
(FIG. 90). This will allow the back cover to be detached from the device.

Remove the old battery

 

Peel the hinge cover film from the hinges on either side of the battery before removing the 
battery. If the battery is attached to the interior of the device with adhesive tape, carefully pry 
the battery free. 

DO NOT

 use sharp or edged objects to pry the battery free, as these may 

damage the battery or the device. Please dispose of the battery in a proper fashion as required 
by municipal or federal regulations.

 

If the battery comes in a protective metal case, remove the two screws holding the battery case 

to the back cover. Carefully remove the battery from the back cover. Please dispose of the 
battery in a proper fashion as required by municipal or federal regulations.

Install the new battery

 

Open the plastic bag containing the MVP-BP-5X kit, taking care not to use sharp instruments 

near the battery itself.

 

Attach the new battery to the back cover, either using the two screws used to hold the previous 

battery to the cover or with the two replacement screws included with the MVP-BP-5X kit.

FIG. 90  

Battery installation and connection diagram

Battery Connector

Attach the residual voltage discharge adaptor (

SAA5966-27-A

) to the old battery and 

allow any remaining charge to dissipate. Note that the adaptor may become warm to 
the touch for up to 12 hours.

Summary of Contents for Modero Viewpoint MVP-5200i











































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands