manualshive.com logo in svg

AMX Modero Viewpoint MVP-5200i, Operation/Reference Manual

Share
Download
AMX Modero Viewpoint MVP-5200i Operation/Reference Manual Download Page 59

Setup Pages

51

MVP-5200i Modero Viewpoint Widescreen Touch Panel

Navigation Buttons

The following Navigation buttons (FIG. 48) appear on the left side of the Setup page:  

Protected Setup Pages

Information on the 

Protected Setup

 pages is available on page 61.

FIG. 48  

Setup Page Navigation Buttons

Press to access the Protected Setup pages.

Press to access the Project Information page in order to view information on

panel specific information such as resolution and memory.

Press to access the 

Time

 page in order to alter the time and date settings on 

the Master.

Press to access the 

Audio page in order to adjust audio parameters

on the panel.

Press to access the 

Battery 

page in order to monitor battery status in 

 

the panel.

the TPDesign file being used, and Panel 

Information

 page in order to view 

Summary of Contents for Modero Viewpoint MVP-5200i











































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands