AMX Modero Viewpoint MVP-5200i, Operation/Reference Manual

Page: 44 / 202

Configuring Communication
36 MVP-5200i Modero Viewpoint Widescreen Touch Panel
9.
Once the system finds the driver, it displays its choice (FIG. 32). Click Finish to complete the driver
installation.
When an IP address is assigned to the usb0 interface on the device, Windows XP will make an attempt to
assign an IP address to the corresponding interface on the Windows side. Usually, this IP address is a
random value and in a totally different subnet. The user may set the Windows network properties for the
Ethernet over USB interface to have a specific address whenever the Windows XP system detects an
MVP-5200i with an assigned IP address.
In Windows XP:
1.
From the Windows XP desktop, click on Start > Settings > Network Connections . This opens a
window listing the currently active network connections.
2.
Select the connection that is specific to AMX USB Device Link .
3. Right click and select Properties .
4.
In the Local Area Connection 3 Properties window (FIG. 33) under the General tab, select Internet
Protocol (TCP/IP) and click on Properties .
FIG. 32 Completing the Found New Hardware Wizard
FIG. 33 Local Area Connection 3 Properties