Appendix H – DGX_SHELL Commands
242
Instruction Manual – Enova DGX 8/16/32/64 Digital Media Switchers
Basic DGX_SHELL Commands (continued)
splash
This command prints splash screen information.
switch
This command graphically displays a matrix switching table 16x16 (8x8, 32x32, 64x64) with outputs on
the top and inputs on the left, indicating the routing state of the switches.
Example:
For an example of the matrix switching table showing Input 1 routed to all outputs, see FIG. 147 at the
bottom of this page.
time
This command displays both run-time clock and system time information.
Usage:
time{-r|-s <seconds>}
-r resync the system clock with real time clock
-s <epoch_seconds> set the real time clock to UTC in seconds from epoch (1 Jan 1970)
The time is displayed in epoch (unix) time.
Example
of response:
rtctime: Tue, 28 Mar 2012 15:27:45 UTC last updated: Thu, 01 Jan 1970 00:00:00 UTC
systime: Thu, 29 Mar 2012 12:51:11 UTC last updated: Thur, 29 Mar 2012 12:47:52 UTC
Note:
For time conversion information, see http://www.epochconverter.com.
~sysb!
This command is used to save (back up) system configuration settings from the SD card.
For additional information on the SD card, see page 66. (This command is also a BCS alias command.)
Alias: config save
~sysr!
This command is used to restore system configuration settings to the SD card. For additional
information on the SD card, see page 66. (This command is also a BCS alias command.)
Alias: config restore
FIG. 147
DGX_SHELL
switch
command displays matrix switching status in a table (Enova DGX 16 shown)
