manualshive.com logo in svg

AMS Neve Logic MMC, User Manual, Page: 7 / 176

Share
Download
AMS Neve Logic MMC User Manual Download Page 7

Glossary of Terms

Alpha Display

The term alpha or alpha display refers to the alphanumeric digital displays used on the console surface. Alpha
displays use LED arrays to show text and numbers.

For instance, the Assignable and Pan Logicators on the fader strips each have an associated eight character
alpha display.

Automation Mode

This refers to the states of controls that are used to record and re-play control moves against timecode. The two
basic Automation Modes are Record and Play, and variations on these are used to perform different functions.

Controls can also be in Isolate mode which is used to exclude them from the automation system.

Button

This is used throughout this manual to refer to buttons on the Encore screen that can be clicked for different
functions within dialogue boxes (e.g. Help buttons). The only exception is the trackball buttons.

This is to avoid confusion with keys on the console surface. Some people prefer to describe keys on the console
surface as buttons. If you see the term button in this manual it will only refer to the Encore screen or the trackball.

Events

Events are changes to control settings that are recorded against timecode by the automation system. They are
recorded in timecode order to make the Event List. When a Mix/Pass is played back, it is the settings in the Event
List that are used to automate the controls. Events make up the majority of the data stored by a Mix/Pass.

Individual Events can be manipulated directly using the Event List functions.

Events are also manipulated using the offline automation functions.

Electronic Scribble Strip

The electronic scribble strips are the alpha displays just above the Access keys on the fader strips that show the
name of the path currently assigned to the fader. They also show the fader level when the fader is touched.
Dependent on preferences.

Encore

Encore is a module within Logic MMC that is used in conjunction with the console surface to provide functions
for configuring and setting up the console, using snapshots and automating the console.

Configuration functions include setting the tone (slate) frequency and volume, selecting the internal sample
rate, deciding how the solo system operates and so on.

Console setup functions include rapid port routing (similar to using a patch bay only much faster), setting how
many paths of each type are to be used, applying the same signal processing functions to multiple paths, etc.

Snapshots are used to record the settings of controls for later recall. The number of controls affected by a
Snapshot can be changed with Snapshot Scope. Encore is used to store multiple lists of Snapshots.

Encore provides management of automation data and a automation functions such as labelling user selected
timecode points, mix conforming and event list editing.

Glide

Glide is an automation function. This is when a continuously variable control (fader, Logicator controlling
frequency, etc.) moves or is moved smoothly to match the Play Pass.

Glossary of Terms

Issue 4

Page 1:1

Summary of Contents for Logic MMC

















































































































































































Reviews:

No comments