AMS Neve Logic MMC User Manual Download Page 174 | Manualshive

Page: 174 / 176

background image

Appendix B: Ghost Recovery and Maintenance Procedure

This Appendix describes how to recover software and custom configurations.

WARNING

The installation of the Ghost Recovery Software will overwrite all data on the hard drive therefore any
Events Lists (AudioFile SC, Media ToolBox) or Automation Data (DFC, Libra) that was saved on the hard
drive will be lost.

It will take approximately 5 mins (using the Ghost Disk supplied) to install the software and configure the system
as it was when it left the factory.

Before Starting

You will need the following items to complete this procedure:

Floppy Disk SFT,ENC,009, Disk 1 - Windows Boot Disk.
Ghost Recovery Zip Disk.

Recovery Procedure

The procedure for recovering software and configurations is as follows:

Insert the floppy disk labelled SFT, ENC, 009 Windows Boot Disk into the floppy disk drive and insert the Ghost
Recovery Zip Disk (supplied with the system) into the Zip drive.

Restart the computer.
Select Shutdown from the Start Menu, select Shutdown & Restart, then click OK.
Otherwise, press Ctrl-Alt-Del.

The System will boot up from the floppy disk and you will be asked to confirm the type of Zip drive fitted. On all
systems the Zip drive is IDE. Press I [Enter] to confirm.

You will be asked to confirm or cancel the Lock command. Press N [Enter] to cancel the Lock command.

The Lock command will have no effect at present, because either the hard disk is new (and therefore blank) or
the hard disk is still formatted with NTFS (the Lock command works with DOS FAT16 partitions).

The A: prompt will appear, type ghost [Enter].

The Norton Ghost initial screen appears. Click on the OK box.

In the drop down menu go to Local, move across to Disk and click on From Image. Select Drive C: Backup.GHO
from the drop down menu drive listing and click Open.

The files on the disk will now copy onto the Boot drive. Remove the disks and reboot.

Recovery procedure is now complete and the system is ready for use again.

Maintenance Procedure

This procedure is recommended if any software updates or any custom configurations have been put on the
system in order to maintain your ghost copy.

The procedure for copying software and custom configurations is as follows:

Insert the floppy disk labelled SFT,ENC,009 Windows Boot Disk into the floppy disk drive and Insert the blank
formatted Zip Disk into the Zip drive.

Restart the computer. Select Shutdown from the Start Menu, select Shutdown & Restart, then click OK.
Otherwise, press Ctrl-Alt-Del.

Appendix B: Ghost Recovery and Maintenance Procedure

Issue 4

Page B:1

«
...
172
173
174
175
176
»

Summary of Contents for Logic MMC

















































































































































































Reviews:

No comments

Related manuals for Logic MMC

Brand: Radio Shack Pages: 24

Brand: Kustom Pages: 8

SB2 OFD Bass microMODELER

Brand: Soundblox Pages: 24

Brand: Fantini Rubinetti Pages: 16

Brand: Doyon Pages: 21

Brand: MMM Pages: 30

Brand: Sound Devices Pages: 84

Brand: LD Pages: 134

Brand: Spirit Pages: 19

Brand: Binatone Pages: 28

Brand: Binatone Pages: 30

Brand: Binatone Pages: 28

AmpliTube X-VIBE

Brand: IK Multimedia Pages: 53

Brand: Behringer Pages: 4

Brand: Gemini Pages: 27

Kit Zentaurus Rev 1.21

Brand: UK-electronic Pages: 15

Brand: JBL Pages: 28

Brand: Russell Hobbs Pages: 48

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands