AMS Neve Logic MMC User Manual Download Page 68 | Manualshive

Page: 68 / 176

AMS Neve Logic MMC User Manual Download Page 68

Cycle

Cycle is used to continuously play between two timecode points (Cycle From and Cycle To) and rewinds the
transport when the end point is reached.

To Cycle click on the Cycle icon on the Encore screen.

The CYCLE key will flash and the MCS Labels dialogue box will be displayed on the Encore screen showing the
current Label List.

There are now two methods of deciding the cycle points: Auto Cycle or Cycle Labels.

Auto Cycle

This uses the last timecodes that were the play and stop points. The Auto Cycle From and To points are updated
every time the PLAY and STOP keys are pressed, so the play point can be updated at any time while the transport
is already in Play by pressing the PLAY key.

While the CYCLE key is flashing, press the CYCLE key again or the PLAY key. The CYCLE key will illuminate
steady and the transport will now cycle between the two points. The other transport keys will indicate the
transport status (i.e. rewind, play, stop, etc.). This will continue until a different transport command is issued.

If the Stop point is in front of the Play point then the Stop point will be used as the Cycle From and the Play point
will be used as the Cycle To (if, for instance, the transport is re-wound and stopped ahead of the Play point).

Cycle Labels

The Labels used for the cycle points can be selected from the MCS Labels dialogue box or by entering Label
numbers on the keyboard.

To select Labels from MCS Labels dialogue box highlight the required pair of Labels. Click the Cycle button,
press the CYCLE key, press the PLAY key or press the Enter key on the keyboard. The CYCLE key will illuminate
steady and the transport will now cycle between the two points. The other transport keys will indicate the
transport status (i.e. rewind, play, stop, etc.). This will continue until a different transport command is issued.

To select Label numbers with the keyboard type the number of the Label with the required Cycle From timecode.
Press the TO key and type the number of the Label with the required Cycle To timecode (this should be after the
Cycle From timecode). Press the Enter key on the keyboard, press the CYCLE key or press the PLAY key. The
CYCLE key will illuminate steady and the transport will now cycle between the two points. The other transport
keys will indicate the transport status (i.e. rewind, play, stop, etc.). This will continue until a different transport
command is issued.

Machine Control

Cycle

Issue 4

Page 15:4

«
...
66
67
68
69
70
...
»

Summary of Contents for Logic MMC

















































































































































































Reviews:

No comments