AMS Neve Logic MMC User Manual Download

Page: 143 / 176

Relays

When a Relay is associated with an Input port, the Relay is closed when the fader is above -60dB.

When a Relay is associated with an Output port, the Relay is closed by Rec Enable.

To associate a Relay with a port double click on the in the Relay column for the required port. An entry box will
appear with an X next to it.

Enter a valid Relay Number using the Encore keyboard and press ENTER on the Encore keyboard.

The number will be shown in the Relay column.

Auto Increment and Auto Copy can be used when associating Relays with ports.

To configure Sample Rate Conversion click on the SRC Configuration tab.

The SRC Configuration page shows AES cards which are installed in the system and allows the SRC Mode and
State to be modified.

The SRC State may only be modified when a suitable Mode has been selected.

Tools Menu

I/O Config

Issue 4

Page 24:19

Summary of Contents for Logic MMC

















































































































































































Search results

Summary of Contents for Logic MMC

Reviews:

Related manuals for Logic MMC

Brands by name

Popular brands

AMS Neve Logic MMC, User Manual

Search results

Summary of Contents for Logic MMC

Reviews:

Related manuals for Logic MMC

Brands by name

Popular brands